The PV25 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multi- springs. Its action can be DA -direct action (air to close) or RA-reverse action (air to open). The PV25 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allows the use of this valve with the most common process fluids such as water, superheated water, steam, air, gas and other non corrosive fluids (group 1).
PNEUMATIC CONTROL VALVES V25G globe control valves with linear actuators PA series PV25 (EN)
Product Description
MAIN FEATURES
Single seated, two way, direct or reverse action valve.
Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator.
Metal to metal sealing as standard.
OPTIONS:
Position transmitter 4-20 mA
Pneumatic pilot positioner
Electropneumatic pilot positioner
Air filter regulator
Top-work manual handwheel
Stainless steel construction
Soft sealing and stellite seat and plug
USE:
Saturated and superheated steam
Hot and superheated water
Air, gases and other noncorrosive fluids
AVAILABLE MODELS: PV25G,PV25S and PV25I
RATINGS: PN16 and PN40
CONNECTIONS: Flanged EN1092-1/-2 PN16 – PN40
ACTUATORS: PA-205; PA-280; PA-340; PA-435
ACTUATOR CONN: 1/4” NPT-F
CONTROL SIGNAL: 0,2 – 1 bar ; 0,4 – 1,2 bar ; 0,4 – 2 bar
